Keep your treadmill running safely with this Heavy-Duty 6ft Power Cord, specifically compatible with the Sole F63 series. While many modern treadmills ship with right-angle plugs, a straight input (NEMA 5-15P to IEC C13) is often preferred for use with recessed outlets or specific surge protector configurations where a right-angle plug might block adjacent sockets.
Because the Sole F63 utilizes a high-torque 3.0 CHP motor, using a "standard" computer power cord is a fire hazard. This generic replacement is built to 14AWG (American Wire Gauge) specifications, ensuring it can handle the continuous amperage draw required during high-speed running without overheating or causing voltage drops that could damage your motor control board.
Length: 6 Feet (Standard reach for home gym setups).
Plug Type: Straight NEMA 5-15P (Standard 3-prong US Wall Plug).
Connector: Straight IEC C13 (The "kettle" style plug that inserts into the treadmill frame).
Wire Gauge: 14AWG (Heavy-duty; rated for 15 Amps). Do not use 18AWG or 16AWG cords on a treadmill.
Rating: 125V / 15A / 1875W.
Compatibility: All generations of the Sole F63 (2011 through 2024+ models).
Many users find that the OEM right-angle plug provided by Sole can be cumbersome:
Surge Protector Friendly: A straight plug won't "cover up" the neighboring outlets on a power strip.
Recessed Outlets: If your outlet is inside a wall box or behind a piece of furniture, a straight plug provides a more secure, direct connection.
Cable Management: Allows the cord to drop straight down or move in any direction without the 90-degree tension found on right-angle versions.
To protect the sensitive electronics in your Sole F63:
Avoid Extension Cords: Never use a standard household extension cord with your treadmill. If you must extend the reach, use a dedicated 12AWG or 14AWG heavy-duty appliance cord.
The "Dedicated Circuit" Rule: Treadmills pull significant power at startup. If your treadmill is sharing a circuit with a vacuum or a space heater, you may experience "Low Voltage" errors (like LS1) on your console.
Check for Heat: Periodically feel the plug after a 30-minute run. If the plug or the cord feels hot to the touch, it indicates a loose connection in your wall outlet or an undersized cord.
Select a row below to filter reviews.
5.0
Copyright Tread Parts. All Rights Reserved. .
