Rock-Solid Foundation: Sole S77 Treadmill OEM Hardware Kit (2010–2013)
Are you reassembling your treadmill after a move, or trying to eliminate an annoying frame squeak during your runs?
The 2010–2013 Sole S77 is a premium, non-folding powerhouse featuring a massive 4.0 CHP motor and a heavy-duty commercial frame. Because this machine does not fold, its structural uprights and console mast absorb continuous, high-frequency impact. Over time, the original bolts can stretch, lose their thread locker, or go missing during relocation. This Genuine OEM Sole S77 Hardware Kit is specifically curated for Serial Numbers starting with 577810 and 577812. It contains the exact high-tensile fasteners required to keep your non-folding frame locked, safe, and whisper-quiet.
Structural Engineering for High-Impact Workouts
Using generic hardware store bolts on a heavy-duty machine like the S77 can lead to dangerous frame swaying or cross-threaded internal nuts.
Grade 8 High-Tensile Steel: Every structural bolt in this kit is heat-treated to safely manage the extreme lateral forces generated by a 12 MPH sprint on the S77's spacious 22" x 60" deck.
Pre-Applied Blue Thread Locker: The critical console mast bolts feature a factory-applied thread-locking patch, preventing the hardware from backing out over time due to the treadmill's harmonic vibrations.
Vibration-Damping Dished Washers: Includes the specialized curved and split-lock washers that sit between the frame and the upright tubes, distributing load evenly and stopping metal-on-metal creaking.
Corrosion-Resistant Coating: Finished with a black-oxide treatment to protect the bolt heads from the corrosive salt and moisture of runner's sweat.
What’s Included in the Kit?
This comprehensive hardware pack replaces the original "Bag of Parts" required to assemble the console masts, handle grips, and protective shrouds:
M8 x 15mm Socket Head Bolts: Used to secure the lower upright tubes directly to the heavy steel base frame.
M8 x 60mm / 80mm Button Head Bolts: Connects the upper console assembly and structural cross-braces to the vertical masts.
Curved Washers & Flat Washers: Essential for stabilizing the round steel tubing of the console uprights.
Self-Tapping Phillips Shroud Screws: For locking down the motor hood and lower frame side caps.
L-Shaped Allen Wrench & Multi-Tool: The factory-spec tools required for tightening the kit and adjusting belt tension.
Assembly & Maintenance Pro-Tip
Because the 2010–2013 S77 frame is heavily welded and rigid, alignment is key during assembly.
The Hand-Thread Rule: Always thread every bolt by hand for 3 to 4 full turns before touching them with the Allen wrench. This guarantees you won't cross-thread the welded internal frame nuts.
The 80/20 Tightening Method: Leave all structural bolts slightly loose (about 80% tight) while building the frame. Once the entire console assembly is connected, go back and torque all fasteners down to 100%. This ensures the frame settles perfectly square.
Rebuild with factory confidence.
