Secure Device Anchoring: Sole® Fitness Treadmill Genuine OEM Integrated Tablet Holder & Media Bracket
Is your tablet holder sagging, dropping your iPad mid-run, or has the spring-loaded upper tension clip snapped off completely? Are you tired of your smartphone vibrating out of the bracket and crashing onto the moving running belt?
Modern cardio training thrives on entertainment and connectivity, whether you are streaming dynamic iFIT trails, catching up on shows, or tracking data via the Sole+ application. Keep your expensive personal screens locked down safely at eye level with the Genuine OEM Sole® Fitness Integrated Tablet Holder Assembly (Part No. SOL1047 / CRP240029-A1 ).
Molded from commercial-grade, impact-resistant composite polymers, this factory-original bracket attaches directly to the top peak of your treadmill's upper console housing. Sourced to original engineering blueprints, it features a high-tension upper retaining lip that clamps securely over your device to absorb aggressive 12 MPH running vibrations and prevent screen tilt.
High-Impact Mechanical Specifications
Please read the strict fitment parameters below before purchasing to prevent ordering errors.
Spring-Loaded Dynamic Clamping: Outfitted with an industrial-grade internal steel recoil spring that continuously pulls down on the upper retaining claw, keeping tablets up to 12.9 inches tightly anchored.
Deep-Pocket Lower Cradle Shelf: Features a widened bottom lip base with built-in side walls to completely eliminate lateral device sliding during steep incline changes.
Anti-Slip Matte Finish Profile: Finished with a specialized textured surface shell that increases friction against smooth glass or silicone device cases, stopping screen rotation.
Direct Core Backplate Mount: Specially engineered to mount directly into the factory-molded screw paths built onto the upper plastic console crown of modern Sole machines.
** CRITICAL FITMENT COMPATIBILITY WARNING
2018 - Current Fleet Only: This replacement part is designed strictly for Sole treadmills manufactured from 2018 through the current production year that were built with an integrated tablet holder from the factory.
No Retrofitting: This will not fit, bolt onto, or adapt to any Sole treadmill manufactured before 2018. If your specific treadmill console did not originally come equipped with this exact style of top-mounted tablet bracket, this part will not fit your machine, as legacy consoles lack the required interior structural metal backing plate and screw channels.
Signs Your Tablet Holder Requires Replacement
Broken Tension Recoil Spring: The top adjustment bracket pulls upward smoothly but completely lists or remains loose without snapping back down, rendering it unable to apply holding pressure to your screen.
Sheared Base Hinge Anchors: The upper clamp works fine, but the lower structural mounting stalks have cracked from past downward force or a collision during transport, causing the entire tray to tilt forward limply.
Plastic Fatigue & Chipping: The lower support lip has cracked away, allowing smaller smartphones or thin media devices to slip straight through the gap during a workout.
The 5-Minute Pro DIY Bracket Swap Sequence
Replacing your console tablet holder is a simple, highly rewarding 5-minute task requiring only a standard Phillips-head screwdriver:
1.Power Down and Stabilize the Console:Complete Hardware Isolation.Turn off the main red rocker power switch at the lower front base of the machine and remove the safety key from the console face. Step onto the side rails so you have clear, comfortable reach over the top of the dashboard.
2.Unbolt the Damaged Bracket Assembly:Isolate the Cockpit Component.Locate the factory mounting screws hidden behind or underneath the base of the old plastic tablet tray. Use your Phillips-head screwdriver to remove the screws by turning them counter-clockwise. Carefully pull the broken bracket away from the top plastic console housing.
3.Seat the New OEM Module and Hand-Secure:Lock in Ergonomic Alignment.Position your Brand-New OEM Sole Treadmill Tablet Holder directly into the recessed alignment channel on the top of the console. Hand-thread the original factory screws back through the tray base into the frame to ensure perfect alignment. Use your Phillips screwdriver to tighten the screws clockwise until the bracket sits completely rigid and flush. Do not over-torque to avoid stripping the interior plastic threads. Snap your device in and run!
Pro Tip: When sliding a large tablet or phone into the new spring-loaded assembly, always lift the top spring-clip completely clear of your device screen before sliding it back down. Avoid forcing your device under the lip at an angle; scraping the thick protective case corners aggressively against the upper claw can eventually stress the plastic retention track and prematurely fatigue the internal coil springs.
Eliminate screen rattling, secure your media devices, and restore showroom performance.
