Sole F80 Motor Control Board (2011 - 2015) 110v

Question

Q: Is this correct replacement F80 control board for 2011.1Q date? #5808101101030802. Based on image it does. Thank you.

Asked by: Rick - 4/2/2025

Submit an answer

Q: I have a Sole F80 treadmill with serial number 5808121207001249. I believe it is a 2012 model. This is showing the same serial number series, but 2013. Is this motor control board compatible with my treadmill? Also, what is your return policy? Thanks!

Asked by: Brad - 8/21/2025

Submit an answer

Q: My F80 has become unresponsive. Electrical outlet is fine and not tripped. I tested the motor and it is also in good order. So, I think the main board has failed because the machine simply won't turn on. It was turning on then would shut off unexpectedly. Please confirm whether this is the correct board for my treadmill s/n 5808121411036152, date code 2014, 4Q. Thanks!

Asked by: Clint - 9/21/2025

Submit an answer

Questions about this item? Ask here.

Accepted Answer

A: No, order the one on the link below.

https://www.sole.parts/Sole-F80-Upgraded-Motor-Control-Board-2006--2011-110v_p_995.html

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Vitu (4/2/2025)

Accepted Answer

Hello Brad.
Your F80 is actually a 2013 and not a 2012. So this controller is compatible with your treadmill. Tread Parts offers a 35 days return policy with no restocking fees. Please do me a favor and wait to permanently screw down the controller until you are sure you are going to keep it. Its difficult for us to restock a controller with screw marks as a new controller.

Accepted Answer

Hi Clint,
Yes it does sound like the issue is with the motor control board. Since you have a 2013 F80 purchased in 2014, my concern is the age of your walking belt. Is this belt the original by any chance? If that's the case, I'd highly recommend changing the walking belt along with the controller. 95% of the time (excluding power surges) these controllers only burn due to high amp draw. High amp draw is caused by an old dry rotten walking belt. Yes, based on your serial number, this is the correct controller. Please feel free to direct any other questions to our inbox. [email protected] attn Vitu. C

Sole F80 Motor Control Board (2011 - 2015) 110v

Send to:

Average Customer Ratings

Related Items

Recently Viewed Items